Check the product videos at YouTube:
www.youtube.com/RFelementscom
www.rfelements.com
4 Insert the Chassis into the StationBox.
Insert pigtails first, then slide the Chassis.
5 Use the Security Screw to secure the
Chassis (optional).
6 Connect the ethernet cable. In case of
more cables, knock off the premolded
positions in the Cover.
7 Close the Cover. Make sure the side locks
lock properly.
8 Install the Bracket on the
Pole or on the Wall. Insert
the Rubber Brake.
9 Attach the StationBox to the Bracket and slightly
tighten the Nut. You should be able to move the
StationBox.
10 Now you can smoothly position the antenna
in 3-Axis. Set the desired elevation, azimuth
and rotation by moving the StationBox
using the Ball joint.
11 While holding the StationBox in desired
position, tighten the Nut as much as you can.
Optional: To secure the position, use Security
Screw that cuts in the Ball part of the bracket.
SEP13