INS193-200705-01
INSTALLATION :
1) Remove access control box cover of the heater.
2) Position the relay in the control box and secure it with provided screws.
3) Connect the low voltage thermostat to the control terminals of the relay.
4) Make the connection of the relay according to the wiring diagram
on the access control box cover.
5) Secure access control box cover and reconnect power supply.
6) Check relay by temporarily setting the thermostat at
maximum temperature and then, at the minimum.
Adjust the thermostat at the desired set point.
CAUTION
DISCONNECT ALL POWER SUPPLIES
BEFORE WORKING ON ANY CIRCUIT.
INSTALLATION INSTRUCTIONS
of the «EGHB» Relay Kit
Reznor LLC
O’Fallon MO USA 63368
Tel.: 1 800 695-1901
www.ReznorHVAC.com
© 2014 Reznor, LLC. All rights reserved.
All other trademarks are the property of their respective organizations.
R1
T2
T1
THE INSTALLATION MUST BE EXECUTED BY A QUALIFIED TECHNICIAN
RISK OF ELECTROCUTION
