17
I-EEDU (02-21) 150492-A
Base-Mounting
⚠ DANGER ⚠
When the furnace is base-mounted on combustible material, a minimum clearance of 12 inches
(305 mm) is required. The base or legs used for base-mounting must be made of non-combustible
material.
Base-mount the furnace as follows:
1 . Remove two hanger brackets from their standard positions and install them at their base-mounting positions as
shown in
, DETAIL A .
2 . Install four leg brackets (see
, DETAIL B) from base-mounting kit (PN 1034022) . Secure leg brackets
with screws provided in existing holes in front . Drill new leg bracket holes in rear .
Figure 12. Base-Mounting Single Furnace
12 INCHES (305 mm)
10 INCHES (254 mm)
HANGER BRACKET
(STANDARD POSITION)
HANGER BRACKET
(BASE-MOUNTING POSITION)
DETAIL B
DETAIL A
