Reyee RG-EW Series, Руководство по настройке

Страница: 6 / 82

Configuration Guide Configuration Guide
2 Configuration Guide
2.1 Preparation
Scenario
As shown in the figure below, an administrator can access the device from a browser and configure the device through the
eWeb management system.
Figure 2-1-1 Data Exchange Principle
Deliver or request
commands
through AJAX.
Administrator
Return data
Web
service
Device
Remarks The eWeb management system combines various device commands and then delivers them to the device
through AJAX requests. The device then returns data based on the commands. A Web service is available on the
device to process basic HTTP protocol requests.
Deployment

Configuration Environment Requirements
Client requirements:

An administrator can log into the eWeb management system from a Web browser to manage devices. The client refers
to a PC or some other mobile endpoints such as laptops or tablets.

Google Chrome, Firefox, IE10.0 and later versions, and some Chromium-based browsers (such as 360 Extreme
Explorer) are supported. Exceptions such as garble or format error may occur if an unsupported browser is used.

1024 x 768 or a higher resolution is recommended. If other resolutions are used, the page fonts and formats may not be
aligned and the GUI is less artistic, or other exceptions may occur.

The client IP address is set in the same LAN network as the device IP address, such as 192.168.110.X. The subnet
mask is 255.255.255.0. Alternatively, you can set the IP assignment mode to Obtain an IP address automatically or
enter ruiyi.cn into the address bar of the browser to access eWeb. The default gateway is device management address
192.168.110.1.
Server requirements:

The device is enabled with Web service (enabled by default).
2