Rextron VCUA-20, Руководство пользователя, Страница: 10 / 31

------------------------Connection
1. The software MUST be installed to the source computer first before the
physical installation.
2. Prior to the installation, ensure to power off all devices that will be
connected to this system.
3. Ensure that all devices you will connect are properly grounded.
4. Place cables away from fluorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
Connection Patterns
„
For the maximum capability and extensions, up to 4 Units can be
daisy chained and connected to the source computer at a time.
„
Use a DVI or VGA cable for the connection between the Unit and the
monitor display.
„
Use a USB A-B cable for the connection between the source
computer and the Unit. The LED on the top panel of the Unit
illuminates BLUE indicating the powered on and connection. The
Unit is self powered by drawing very little power from the connected
source computer via the USB cable connection.
NOTE: The driver installation procedure and software operations may
differ from version to version, that may cause the snapshot on this
user’s manual slightly differ from others without affecting the
function.
9