Rextron NXDU-M220, Руководство пользователя, Страница: 9 / 28

9
Part 1: Uni-Cast Configuration
2. Push Button Control
VIDEO Extender over Giga LAN
 Press once (click within 0.3 sec.) - Link/ Unlink video (also functions for
all Tx & Rx in the same channel)
F1
 Factory Default Setting for Tx: Power off the unit
→
Press and hold the
button
→
Power on the unit
→
Release the button after 17 sec. right
after the Power/Link LED flashes green & blue)
→
Re-power the unit

Press for 1 sec. - Select Graphic Mode or Video Mode (also functions for
all Tx & Rx in the same channel)
(Factory default: Graphic Mode)
F2
 Press for 3 sec. – Enter Anti-Dither Adjustment Mode: Level 1 /Level 2 /
Off (also functions for all Tx & Rx in the same channel)
(Factory Default: Off)
Tx
Reset  Reboot the system
 Press once (click within 0.3 sec.) - Link/ Unlink video (also functions for
all Tx & Rx in the same channel)
 Press and hold – USB port function enable/ disable
F1
 Factory Default Setting for Rx: Power off the unit
→
Press and hold the
button
→
Power on the unit
→
Release the button after 17 sec. right
after the Power/Link LED flashes red & blue)
→
Re-power the unit
 Press for 1 sec. - Select Graphic Mode or Video Mode (also functions for
all Tx & Rx in the same channel)
(Factory default: Graphic Mode)
 Press for 3 sec. – Enter Anti-Dither Adjustment Mode: Level 1 /Level 2 /
Off (also functions for all Tx & Rx in the same channel)
(Factory Default: Off)
F2
 *EDID Copy: Power off the unit
→
Press and hold the button
→
Power
on the unit
→
Release the button after 12 sec. (the Network Status LED
flashes yellow)
Rx
Reset  Reboot the system