Rextron MACU-021, Руководство пользователя, Страница: 9 / 33

------------------- Connection
Before the Connection
1. Install the software to the computer first before the physical installation.
2. Prior to the installation, ensure to power off all devices that will
be connected to this system.
3. Ensure that all devices you will connect are properly grounded.
4. Place cables away from fluorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
Connection Patterns
„
Use a USB A-B cable for the connection between the computer and
the Unit . The LED on the top panel of the Unit illuminates GREEN
indicating the powered on and PC connection.
„
Use a DVI
and/
or a VGA cable(s) for the connection between the Unit
and the DVI and/or VGA monitor(s). The LED on the top panel of the
Unit will turn from GREEN to RED indicating the monitor connection.
NOTE : Both VGA and DVI monitors display the same screen all the time
„
Use the USB cables for the connection between the USB
keyboard/mouse and the respective USB ports on the Unit.
„
If needed, use a USB cable to connect one USB device into the USB
peripheral ports either one on the top panel or the other one on the
side panel.
NOTE : The two peripheral USB ports are alternative to each other for
plug orientation purpose, and only either one of those 2 USB
ports can be used at a time. (Refer to the following figures)
-5-