Rextron EK-11S, Руководство пользователя, Страница: 17 / 23

15
-----------------
Hotkeys Control
Hotkey command is a short keyboard sequence to select a computer,
to activate computer scan, and so forth. The
KVM Extender
interprets keystrokes for hotkeys all the time. A hotkey sequence
starts with two
left Ctrl keystrokes followed by one or two more
keystrokes. A built-in buzzer generates a high-pitched beep for
correct hotkey command, while one short and one long beeps are
sounded for wrong commands. Thus, the bad key commands will not
be forwarded to the selected modes.
There is an unique Hotkey command of
Ctrl + Ctrl + Alt+E you
should be well aware when the KVM Extenders are connected to
other KVM Switches.
To switch to this mode, press left Ctrl twice, hold Alt and press E
key(press both keys simultaneously). This function is used to prevent
from misunderstanding once the system is connected to Rextron’s
KVM Switches. Thus, the user can choose either the control mode of
KVM Extender or the number of computer connected to the KVM
Switches .