Hydraulics
Bosch Rexroth AG
RE 51142/05.13 UPE 2
3
/10
Basic module "G"
– Basic module with integrated pressure relief valve for simple stroke lowering or
pressure holding functions
– If the "G" basic modules are used, no further stacking is possible.
– For further details see data sheet 51144
"Control block for clamping and drive modules type IH15A"
Basic module "G"
Directional valve module "W"
1)
– Allows the design of controls using valves with porting pattern according to
DIN 24340 form A
– The number of directional valve modules depends on the draw-off volume and
the displacement of the pump
– For further details see data sheet 51144
"Control block for clamping and drive modules type IH15A"
Directional valve module "W"
Seat valve module "S"
1)
– Seat valves basically consist of:
• a pressure relief block
• one or several control blocks
• one end block
– The control is designed depending on the relevant application
– The number of seat valve modules depends on the draw-off volume and the
displacement of the pump
– For further details see data sheet 51144
"Control block for clamping and drive modules type IH15A"
1)
The directional valve modules and the seat valve modules can be combined!
Seat valve module "S"
Overview of the attachment modules
UPE2_G•
UPE2_W•
UPE2_S•
