REXROTH Sytronix FcP 5020, Руководство по эксплуатации

Страница: 15 / 204

2 Safety Instructions
2.1 General Information on this Chapter
The product has been manufactured according to the generally accepted co‐
des of practice. However, there is still the risk of personal injury and damage
to property if you do not observe this chapter and the safety instructions in
this documentation.
●
Read this documentation completely and thoroughly before working with
the product.
● Keep this documentation in a location where it is accessible to all users
at all times.
● Always include the required documentation when you pass the product
on to third parties.
2.2 Intended Use
This product is an electrohydrostatic drive system.
The FcP system is exclusively intended to be installed in a machine or to be
assembled together with other components to form a machine and/or a pow‐
er unit. The FcP system may only be commissioned after it has been integra‐
ted into the machine for which it is designed.
The FcP system may be used as follows:
●
For pressure-controlled hydraulic supply with override flow control
The FcP system is not suitable for performing safety-relevant functions.
A plausibility check of the command and actual values (pressure
and speed) is not provided for in the FcP system.
●
Make sure that the plausibility check is carried out in the ma‐
chine control.
In order to carry out an application-specific adjustment of the parameters
within the scope of the initial commissioning, please contact your Bosch
Rexroth application engineer.
The product is only intended for professional use and not for private use. In‐
tended use includes having read and understood this documentation com‐
pletely, especially this chapter.
2.3 Improper Use
Any use deviating from the intended use is improper and thus not admissible.
Bosch Rexroth AG does not assume any liability for damage caused by im‐
proper use. The user assumes all risks involved with improper use.
DOK-SYTROX-FCP5020****-IT01-EN-P Bosch Rexroth AG 13/201
Frequency-controlled pump drive system Sytronix FcP 5020
Safety Instructions