REXROTH IndraControl L25 CML...3N Series, Руководство по планированию проекта

Страница: 24 / 72

4.3 Ambient Conditions
In operation Storage / Transport
Max. surrounding air
temperature
+5 ... +55 °C -25 ℃ to +70 ℃
Relative humidity RH-2; 5 % to 95 % acc. to DIN EN 61131-2,
non-condensing. RH-2; 5 % to 95 % acc. to DIN EN 61131-2,
non-condensing.
Air pressure Up to 2,700 m above MSL according to
DIN 60204
Up to 3,000 m above MSL according to
DIN 60204
Mechanical strength Max. vibration:
Frequency range: 10 to 150 Hz
Excursion: 0.075 mm
for 10 ... 57 Hz
Acceleration: 1 g
for 57 to 150 Hz
acc. to EN 60068-2-6 Max. shock:
15 g according to EN 60 068-2-27, no disturbance
of the function
Fig.4-3: Ambient Conditions
The surrounding air must be free from acids, alkaline solutions,
corrosive agents, salts, metal vapors, and other electrically con‐
ductive contaminants in high concentrations.
The ambient air must be dust-free. Housings and installation com‐
partments must at least comply with degree of protection IP 54
according to DIN VDE 0470-1.
Danger of destruction by overheating
DANGER
Operation is allowed up to 45 ℃ and if the air recirculates.
If the internal temperature reaches approx. 92 ℃, the control switches off au‐
tomatically.
If the internal temperature is 87 °C or higher, the display indicates the warning
"Temp !!!".
The internal temperature of IndraControl L25 can be read out with the "IH_Tem‐
perature" function in the "RIH_HWTestLib" library of the application program in
order to trigger further reactions.
4.4 Used Standards
The IndraControl L25 complies with the following standards:
Standard Meaning
DIN EN 60 204-1 Electrical equipment of machines
DIN EN 61 131-2 Programmable logic controllers
Equipment and tests requirements
Bosch Rexroth AG DOK-CONTRL-IC*L25*****-PR03-EN-P
Rexroth IndraControl L25
22/69
Technical Data