PAGE 8
•
Scan
RM-03 allows optionally looking for carrier or carrier with CTCSS or
DCS. Your dealer can program those channels to be scanned on the
scan list.
Frequency/Channel Scan (Carrier Scan)
Press
button repeatedly until LCD shows “FREQ/CH SCAN?”,
then press
button to begin scanning per frequencies or per chan-
nels.
During scanning, press UP/DOWN button on the Mic or rotate power
knob to change scanning direction; press any button to stop scanning.
(except
button).
When the transceiver is programmed with PA frequencies
and PB frequencies, in frequency mode (VFO), frequency subsec-
tion scan is valid. For more details, please refer to HELP options in
programming software.
CTCSS / DCS Scan (Tone Scan)
Press
button repeatedly till LCD displays “CTCSS/DCS
SCAN?”. Then press
to start scanning. When finding a match
-
ing signaling, the scan will resume for 15 seconds. Press any key to
stop scanning.
Tone Scan will be invalid if no sub audio tone is received in
current channel.
Press Mic UP/DOWN or power knob to change
scanning direction.
•
Monitor
This function allows you to override the squelch and the CTCSS
,DCS or 5 tone or listen to weak signal. Through PC programmer, you
can define Monitor function to be operated as:
1. Keep pressing
button to open squelch and release it to stop
monitor. or
2. Press
one time to activate monitor function. Presss it again
to stop monitor.
