REXON PJ2-COM RADIO, Руководство оператора, Страница: 18 / 28

18
Memory Recall
To recall a frequency stored in a memory channel, press the Recall
Key. The first five memory channel numbers and their corresponding
frequencies will be displayed. The first stored memory channel
immediately becomes the active frequency and is received by the
PJ2 COM.
In this example, memory channel 00 is listed first.
At this point you may select any stored memory channel by either
pressing the Up or Down Key to scroll through the stored frequencies.
Memory channels stored on other pages may also be accessed directly by
using the Numeric Keypad. For example, to receive memory channel 08
you may either:
1. Press the Recall Key followed by the Up or Down Key to scroll to 08
Or
2. Press the Recall Key followed by 0 8
Once in the Recall function, the PJ2 COMM stays in Recall until the
Clear Key is pressed. This allows you to sequence your frequencies in the
order you may wish to use them. For example, you may wish to store
your airport’s ATIS in memory channel 00, Clearance Delivery in channel
01, Ground in channel 02, Tower in channel 03 and Departure Control
in channel 04. For this example, you would press the Recall Key once
followed by the Down Key for every frequency change instead of having
to enter each frequency manually.
While in the Recall function the only entries accepted are Numeric
Keypad entries between 00 and 19, the Up or Down Key or the Clear Key.
All other inputs cause the PJ2 COM to beep. Remember, you may press
the Clear Key at any time to exit the Recall function. Once you have left
the Recall function, the PJ2 COM will remain on the last frequency that
was being received.