Rexnord Falk Steelflex T10, Инструкция по установке и обслуживанию

Страница: 8 / 9

Installation and Maintenance Instructions • Falk Steelflex
®
(Page 8 of 9) Type T10 & T20
428-111
Rexnord Industries, LLC, 5555 S. Moorland Rd., New Berlin, WI 53151-7953
02/2012 Telephone: 262-796-4060 Fax: 262-796-4064
Supersedes manuals 428-110, 112, 210 - 04/2005 e-mail: info@rexnord.com web: www.rexnord.com
10.2. Operating limits for Steelflex Couplings
11. Coupling lubrication
LTG Coupling grease
The High centrifugal forces encountered in couplings separate the base oil and thickener of general purpose greases. Heavy thickener, which
has no lubrication qualities, accumulates in the grid – groove area of Steelflex couplings resulting in premature hub or grid failure unless
periodic lubrication cycles are maintained.
Table 6 - Cover fastener tightening torque
Cover Fastener
Tightening
Size 1020T 1030T 1040T 1050T 1060T 1070T 1080T 1090T 1100T 1110T 1120T 1130T 1140T
T10
lb-in 100 100 100 200 200 200 200 200 312 312 650 650 650
Nm 11.3 11.3 11.3 22.6 22.6 22.6 22.6 22.6 35.0 35.0 73.4 73.4 73.4
T20
lb-in 100 100 100 200 200 200 200 200 260 260 260 650 650
Nm 11.3 11.3 11.3 22.6 22.6 22.6 22.6 22.6 29.4 29.4 29.4 73.4 73.4
Cover
Fastener
Tightening
Size 1150T 1160T 1170T 1180T 1190T 1200T 1210T 1220T 1230T 1240T 1250T 1260T
T10
lb-in 650 650 1300 1300 1300 2300 2300 3580 3580 5350 5350 5350
Nm 73.4 73.4 146.9 146.9 146.9 259.9 259.9 404.5 404.5 604.5 604.5 604.5
T20
lb-in 650 1300 1300
Nm 73.4 146.9 146.9
Table 7 - Angular Operation limits
Angular Size 1020T 1030T 1040T 1050T 1060T 1070T 1080T 1090T 1100T 1110T 1120T 1130T 1140T
X-Y
Inch 0.010 0.012 0.013 0.016 0.018 0.020 0.024 0.028 0.033 0.036 0.040 0.047 0.053
mm 0.25 0.30 0.33 0.41 0.46 0.51 0.61 0.71 0.84 0.91 1.02 1.19 1.35
Angular Size 1150T 1160T 1170T 1180T 1190T 1200T 1210T 1220T 1230T 1240T 1250T 1260T
X-Y
Inch 0.062 0.070 0.079 0.089 0.097 0.107 0.118 0.129 0.142 0.154 0.169 0.183
mm 1.57 1.79 2.01 2.26 2.46 2.72 3.00 3.28 3.61 3.91 4.29 4.64
Table 8 - Parallel Operation limits
Parallel Offset Size 1020T 1030T 1040T 1050T 1060T 1070T 1080T 1090T 1100T 1110T 1120T 1130T 1140T
P
Inch 0.012 0.012 0.012 0.016 0.016 0.016 0.016 0.016 0.02 0.02 0.022 0.022 0.022
mm 0.300 0.300 0.300 0.410 0.410 0.410 0.410 0.410 0.510 0.510 0.560 0.560 0.560
Parallel Offset Size 1150T 1160T 1170T 1180T 1190T 1200T 1210T 1220T 1230T 1240T 1250T 1260T
P
Inch 0.024 0.024 0.024 0.030 0.030 0.030 0.036 0.036 0.038 0.038 0.040 0.040
mm 0.610 0.610 0.610 0.762 0.762 0.762 0.914 0.914 0.965 0.965 1.020 1.020
Type T10 Type T20