Getting Started
Installation
7
Removing a Memory Card
Before removing a memory card from your V2 PRO, you must first dismount it
for safe removal
With the device powered down
, press down the memory card until you hear
a click. Gently remove your finger (or other pressing object) to allow the
spring release to push the memory card out of the slot.
Note: Do not remove the memory card while the device is transferring
or accessing information.
Doing so can result in data loss or corruption or
damage to the memory card or device.
Rexing
is not responsible for losses
that result from the use of damaged memory cards, including the loss of data.
3. Formatting a Memory Card
3.1 Powering the Camera
You must always connect the V2 PRO to a power source while
operating the camera.
Connect the larger end of the included car charger
cable to your car’s cigarette lighter (12V DC power outlet) and connect the
other Mini-USB end to the Mini-USB port on the device.
Note: Connecting the charger improperly may cause serious damage to
the device. Any damage caused by misuse is not covered by the
warranty. Use only Rexing-approved chargers. Using unapproved
chargers or cables can damage the device.
