Operating your V1LG Dashboard Camera
Updating Firmware
41
© 2018 REXING All Rights Reserved.
Updating Firmware
The following procedure will allow you to use the
Rexing
website to update
firmware for your V1LG Dashboard Camera. This is necessary for enabling all
available features on your device.
1.
Go to firmware.rexingusa.com download the firmware file to your computer
2.
Unzip the file
3.
Format your memory card in your computer (or unit)
4.
Copy the FW96655A.bin file to the root of your memory card
5.
Put card into camera
6.
Power camera on (make sure the camera is plugged in)
7.
The camera will update automatically. The screen will stay off but the
status light will light up; it will take 30-60 seconds
8.
(important) After updating, format the memory card or it will flash every
time
9.
Do not disconnect power cord, hold power button to reboot unit