"TIMUN" REXING GT WHEEL - QUICK GUIDE
7
Buttons' LEDs
In the "Buttons' LEDs" section, click on any single button LED to configure its function. The buttons
LEDs have fixed color. Configuration is done in the same way as for RPM LEDs. The "Buttons' Leds"
section also enables to adjust the brightness of pushbutton LEDs.
EXAMPLE LEDs SETUP
This is an example of a button LED which is always on, but starts blinking when speed limiter is on.
In "Buttons' LEDs" section click on a single LED to configure it. Click on "New", and choose
the "LED always ON" condition, with Blinking set to None. The next condition you set will
come above this condition and will have priority.
Click on "New" again and choose, for example, the condition "Speed limit is ON". Set
Blinking to Normal. This way the LED which is normally on will start blinking when the speed
limiter is on.
Remember to click OK both on the LED configuration screen and on Rexing configuration
screen in order to save your settings.
