Getting Started
Connect the Micro USB cord of the power adapter to the camera and the other
end to a power outlet (110 220V AC Outlet).
Once the camera is plugged in, it will automatically turn on and the blue indicator
will be on.
•
If the pairing is not successful, please refer to Pairing Instructions on page 11 to
repair the camera;
•
If Pairing , you need to press the switch key to switch to view. If you
are pairing , press the switch key to display view. (Optional is
available to purchase separately.)
1. Power On Baby Camera
Plug in the USB power cable to turn on the camera.
Unplug the power cable to turn off the camera.
2. Turn On/Off Baby Camera
3. Parent Control Unit Switching On/Off
When the Baby Camera and the Parents Control Unit are turned on, live
footage from the camera is showed onto the display (If the display is not
normal, check the camera pairing connection).
4. Review Images
It takes 3-4 hours to fully charge the Parent Control Unit to use wirelessly. If the
device is connected through the USB cable to a power source then it will stay
powered.
Press and hold the power button for 3 seconds to switch on/off the parents
unit. Pull out the receiving antenna on the Parents Unit to establish a good
connection with the baby camera.
9
