Only for charging/power supply to 19V Notebook
1. Plug the switch cable A to USB 19V 3.5A output port.
2. Select appropriate connector for your Notebook and connect
it to the switch cable A and your Notebook.
3. Press the switch button to charge/power supply.
Charging Cell Phone or Tablet Instruction:
1. Plug the switch cable B to USB 5V 2A output port.
2. Select appropriate connector and connect it to your mobile
phones or tablet.
3. Press the switch button to charge.
4.If doesn’t work, please try another USB Output port.
3
RED LIGHT on with
buzzing:
Telling the
connection is wrong, and
buzzing to alarm to
correct the clamps as step
2 mentioned above, wait
until the GREEN LIGHT is
on to turn on the engine.
GREEN LIGHT on:
Telling the connection
is correct and the
circuit is working, you
can turn on the engine
to jump-start directly.
GREEN LIGHT blinking
with buzzing:
Saying
the vehicle battery is
low, press the “BOOST”
button, wait GREEN
LIGHT becomes solid,
then turn on the engine
within 30s.
No Lights on, No
buzzing:
Saying the
vehicle's battery maybe
damaged, after confirm
the clamps connection is
correct, press the
“BOOST” button, wait
GREEN LIGHT is on, and
then turn on the engine
within 30s.
Beep,Beep
Beep,Beep
4.Start the vehicle.
5.When the vehicle is started, remove the jumper cable from the
vehicle battery. Leave the vehicle's engine running.
