![Revox STUDIOART B100 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/revox/studioart-b100/studioart-b100_quick-reference-manual_1448992014.webp)
Cable connection between B100 and stereo / home theater amplifiers Line input (L / R)
6
The B100 bass module can also be connected via cable to any stereo or home theater amplifier that has a preamp / subwoofer
output outside the
STUDIO
ART series; e.g. with a
Revox Joy Receiver S119
or
S120
.
Classic stereo amplifiers
with a stereo preamp output, connect to a 1: 1 RCA cable. The cut-off frequency up to which the
B100 should support the other loudspeakers in the bass range is set on the B100. Phase and volume can also be adjusted using
the rotary controls.
For
home cinema amplifiers
with an explicit subwoofer output (LFE signal), a Y adapter is required, which splits the single-
channel signal into the two B100 inputs [Line Input R + L]. Here, the home theater amplifier usually determines the crossover
frequency. Therefore, in this case, the cut-off frequency should be set to the maximum of 200 Hz and the phase to 0 °. The
volume can be adjusted using the rotary control.