16
Page
USER GUIDE
Re:source M37 audio server
has low signal loss caused by other
cables and is completely isolated from
the ground loop. The audio output
of the Digital Optical Out connector
is the same as the audio output of
the Analogue Audio Out 1 connector.
This output may not be used for
making a digital copy of your media.
DiGital in - coaxial
High quality recordings can be made
onto the hard disk of the Audio
Server using a coaxial connection
from a suitable device (such as
Minidisc or DAT). (Not yet supported
in the current software release).
DiGital out - coaxial
By connecting this jack to a digital
audio component (D/A converter, A/V
amplifier etc.), digital signals from
the Audio Server can be transmitted
directly from the system without first
being converted to analog. The
audio output of the Digital Coaxial
Out connector is the same as the
audio output of the Analogue Audio
Out 1 connector. This output may not
be used for making a digital copy of
your media.
analoGue in
Analogue sources (such as cassette or
vinyl LP) may be recorded onto the
hard disk of the Audio Server using
this connection. (Not yet supported
in the current software release).
analoGue out 1,2,3,4
The Audio Server is a multiroom
device allowing you to listen
to different music in up to four
different rooms all at the same time
(depending on the configuration
purchased). Each analogue output
should be connected to the input
jacks of a pre-amplifier.
mains
Connect the supplied mains lead to
this connector to provide power to
the unit.
