Revox Joy S118, Руководство пользователя

Страница: 22 / 90

network receiver Configuration
20

Select device
You select a device that is available in
the remote control and that you want to
control, through this menu. All devices
are listed here, irrespective of whether
they are assigned to a zone or not. The
devices can be Revox Joy network
receivers or third-party devices that are
controlled by infrared (IR).
Joy network receivers are added to the
device list through the pairing process.
IR devices are added to the device list
through the
S208 EasyCreator
PC
program.

Change zone
This menu enables you to change to or
call up another zone. This function can
also be called directly through the
button.

Information
This menu gives you various details such
as serial number, software states or the
number of integrated devices.
The USB login is also done through this
menu of the S208 is to be configured
through the
S208 EasyCreator
PC
program. For this purpose, a USB
connection (USB Mini <-> USB B) is set
up between the remote control and a PC
running Windows. Then, the red button
is pressed in the Information
menu. This initiates the S208 connection.
If connection is successful, "Connected"
appears in the S208 display.

Start Pairing
Background information to pairing
A fixed communication must be created
for the bidirectional wireless connection
between the S208 remote control and
the network receiver, in order that they
can communicate securely with each
other again after a restart or power
outage. This is also necessary because
there may be several network receivers
and remote controls in one system. The
exchange of information for the purpose
of uniquely identifying the devices is
called Pairing. An S208 remote control
can be deployed for the control of
several network receivers and as a
result can also be paired with several
network receivers.
Pairing process
To prepare for the pairing of an S208 and
and S118, switch the network receiver
off by unplugging the plug from the
mains and wait until the status LED on
the front panel has gone out. If you now
plug in the cable to the mains again, the
LED flashes green

for about 10
seconds. During this time, you have the
chance to start the pairing process
[Start Pairing], using the OK button. Once
a network receiver is recognised, its
name appears in the S208 display. Now
the name and the preferred hotkeys can
be selected. This completes the pairing
process.