8. Wiring
The proper wiring of the Revolutions Thermo Regulator is shown on the Figure 1a.
·
Terminals 1 and 2 – are designed for a remote circuit closer for a start/stop.
·
Terminals 3 and 4 – outputs a for motor control
·
Terminals 11 and 12 – input for a connection of the temperature sensor type
LM335, provided by INTIEL. Take into account the sensor correct polarity
during its connection.
9. Warranty period
The warranty period is 24 months following the purchase date of the unit or its
installation by an authorized Engineering Company, but not exceeding 28 months after the
production date. The warranty is extended to the malfunctions that occur during the warranty
period and are result of the production reasons or defective used parts.
The warranty does not relate to malfunctions corresponding to not-qualified
installation, activities directed to the product body interference, not regular storage or
transport.
The repairs during the warranty period can be done after correct filling of the
manufacturer warranty card
Warranty Card
Manufacturer:
INTIEL
Product type
Production number
Production date
Dealer confirmation
Purchase date
Invoice number
Dealer’s name, address and
stamp
Seller’s name and signature
Installation Date
Date
Company (address, stamp)
Installer’s name and signature
tel.: 00359 596.333.66 ||| fax: 00359 596.325.80 ||| [email protected] |||
www.intiel.com
9 Peter Beron Str., Pomorie 8200, Bulgaria
4
