Revolution ND-20, Руководство пользователя

Страница: 22 / 27

- 20 -
LOADING/UNLOADING
MACHINE FOR
TRANSPORTING
When transporting the machine by use
of trailer or truck, carefully follow the
loading and tie-down procedure:
1. Raise the scrub head and
remove squeegee
assembly.
2. Use a ramp that can support the
machine weight and operator
and carefully load machine. Do
not operate the machine on a
ramp incline that exceeds a
21% grade level (Figure 130). A
winch must be used when ramp
incline exceeds a 21% grade
level.
FOR SAFETY: When
loading/unloading machine
onto/off truck or trailer, use a
ramp that can support the
machine weight and
operator.
FOR SAFETY: Do not operate
the machine on a ramp
incline that exceeds a 21%
grade level.
3.
Once loaded, position the front of the
machine up against the front of the trailer or
truck. Lower the scrub head, turn key off and
set parking brake, if equipped
4. Place a block behind each wheel
5. Using tie-down straps, secure the
machine using the four tie-down brackets
located on the machine frame (Figure 131).
It may be necessary to install tie-down
brackets to the floor of your trailer or truck.
STORING MACHINE
The following steps should be taken
when storing the machine for extended
periods of time.
1 Charge the batteries before storing
machine to prolong the life of the
batteries. Recharge batteries every 3
months.
2 Drain and rinse recovery tank and
solution tank.
3 Store the machine in a dry area with
squeegee and scrub head in the up
position.
ATTENTION: Do not expose machine to
rain, store indoors .
4 Open the recovery tank lid to
promote air circulation.
NOTE: To prevent potential machine
damage store machine in a rodent and
insect free environment.