9
Charger Viewer Software
Installing the Charger Viewer Software
For detailed information on installing the Cellpro 4s Gold Charger Viewer Software, please go to
www.fmadirect.com/downloads.html
, scroll down to the
Software Updates
section, then click the
link for the Cellpro 4s Gold Viewer Software.
Using the Charger Viewer Software
Use the Charger Viewer Software to monitor pack
voltage, cell voltages, charge current and safety codes
on your PC.
1. Connect the Charger to a pack and to a power
supply.
3. Connect the Charger to a PC using an FMA
FUIM2 or FUIM3 adapter. Plug the adapter’s
3-pin connector into the jack on the Charger’s left
side. The black wire should be toward the top of
the Charger’s panel.
4. On the PC, launch the Charger Viewer program.
The program checks ports until it finds charger
data, or open the
Comm
list and select a port.
n
To add notes:
View > Battery Notes
.
n
To see voltage versus time:
View > Graphs
. Then in
Graph
window,
View >
Charge Voltage
or
View > Discharge Voltage
as
needed.
Tip:
Resize the
Graph
window to see more detail.
