Set-Up Guide
Lifesize® Installation (Lifesize Team shown for example)
This information is meant to be illustrative only. Consult your Lifesize
Videoconferencing System Administrator Manual for specific instructions.
Step 1 Step 2
1. Plug the red RCA connector on one end of
Cable C
into Lifesize video-
station <Audio Out 1>, and then plug the red RCA connector on the other
end into the Fusion Base Station <Conf In>.
2. Plug the black RCA connector on one end of
Cable C
into Lifesize video-
station <Audio In>, and then plug the black RCA connector on the other
end into the Fusion Base Station <Conf Out>.
To configure the Lifesize system:
Select the button from the main screen to access the System menu.
Select the
Administrator Preferences
settings.
Enter the administrator password and press
OK
(if needed).
Select the
Audio
settings.
Confirm or modify the following settings:
Voice Call Audio - Output
Line Input - Enabled
Line In to Line Out - Disabled
Line In Acoustic Echo Canceller - Disabled
Press
OK
to save changes.
Page 16
