SYSTEM SETTINGS
Software update
Check now
Auto-Check setting *
FACTORY RESET
By
selecting
FACTORY RESET from the SYSTEM SETTINGS menu, you
can reset SUPERCD to its default factory values, erasing any personal
settings that may have been confi gured (time/date, network
confi guration and presets will be erased). However, the current
software version is maintained, as is its registration with the internet
radio portal. Internet radio favourites (not presets) are therefore
retained, unless you re-register your radio with another account on
the portal.
To perform a factory reset,
press
then
select
MAIN MENU,
followed by SYSTEM SETTINGS, then FACTORY RESET. Now answer YES.
SOFTWARE UPDATES
From time to time we will make software updates available for your
SUPERCD. These are necessary for general maintenance reasons,
as well as for adding additional functionality. Software updates are
carried out ‘over-the-air’, via your broadband connection.
SUPERCD will check for software updates each time it is switched on,
and if an update is available, will ask you to confi rm that you’d like to
go ahead and commence the download.
Please note that after a software upgrade, all user settings are
maintained.
If you’d prefer to manually check for software updates,
press
then
select
MAIN MENU. Now
choose
SYSTEM SETTINGS, then
SOFTWARE UPDATES.
Select
AUTO-CHECK SETTING then
choose
NO
when prompted.
To manually check for updates,
select
CHECK NOW from the
SOFTWARE UPDATES menu.
CAUTION
: Before commencing a software upgrade, ensure that
SUPERCD is plugged into a stable mains power connection.
Disconnecting power during a software update may permanently
damage your device.
Factory Reset
Proceed?
YES
NO
40
