Revo RETRT2812-2, Руководство по эксплуатации

Страница: 11 / 28

- 11 -
사 용 설 명 서
2. Select the desired mode using Up and Down buttons.
▶
BRIGHTNESS : Adjusts the exposure brightness.
▶
SHUTTER : You can select either auto or manual shutter.
● A.FLK : Select this when you experience picture flicker, which can happen when there is a clash
with the frequency of the installed lighting.
● ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is
automatically controlled depending on the ambient illumination of the subject.
● MANUAL : You can control shutter speed manually. (1/60 ~ 1/120,000)
● - - - : Shutter speed is fixed at 1/60 sec. (1/50 sec.)
▶
AGC (AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen, but the higher the
noise.
● OFF : Deactivates the AGC function.
● LOW : Allows automatic gain control from 5.3dB to 32dB.
● HIGH : Allows automatic gain control from 5.3dB to 37dB.
▶
SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a
clear picture if this mode is activated.
● OFF : Deactivates the SENS-UP function.
● AUTO : Activates the SENS-UP function.
● When using a DC lens, set the shutter mode to A.FLK if color rolling occurs.
● When the SHUTTER is set to ESC after selecting Internal Synchronization Type, the picture
may become unstable if the camera faces a bright fluorescent light. Therefore, take care
when choosing the installation position.
● When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
● Set the shutter mode to - - - if color rolling occurs.
EXPOSURE SETUP
▶ |||||*||||||||||||||||
1. BRIGHTNESS
2. SHUTTER
3. AGC
4. SENS-UP
5. RETURN
←
25
- - -
HIGH
OFF
☞
NOTE
▷
SHUTTER continued
LIMIT
Press SET to Return
▶
AUTO X2
USER'S MANUAL