Revo RESPTZ36-3, Инструкция по эксплуатации

Страница: 35 / 49

29
• VIEW ANGLE SETUP
FLIP
ON / OFF
OFF
the dome camera moves until 90
°
vertically.
ON
When the camera reaches the floor directly above the moving object, it will stop. At that
time, release the
Joystick
handle instantly and pull it down again to run the auto-flip
function. When you use the panning range, we recommend using the flip mode to ON.
TILT ANGLE LIMIT
-10 ~ 10
This option is used to set the limit of the horizontal view
PANNING RANGE
When the dome camera is installed near a wall, panning range can be limited by user.
1. Place the dome camera under 90 degree vertically.
2. Set the right limit by pushing the
Joystick
to the right.
3. Set the left limit by pushing the
Joystick
to the left.
4. Set ENABLE to ON to use
To exchange the right and the left limit, set SWAP to ON.
To apply limits on the auto pan (endless panning), set AUTO PAN to ON.
NOTE: When you use the panning range, we recommend using the flip mode to AUTO. When the flip mode is
90
°
, 100
°
, 110
°
or 120
°
and you moves over 90
°
vertically, the panning range operates in opposite side.
VIEW ANGLE SETUP
PANNING RANGE
FLIP : ON
TILT ANGLE LIMIT : 00
°
SAVE AND EXIT(ESC TO CANCEL)
PANNING RANGE SETUP
(CTRL KEY)
RIGHT LIMIT : 000.0
LEFT LIMIT : 000.0
ENABLE : OFF
SWAP : OFF
AUTO PAN : ON
SAVE AND EXIT(ESC TO CANCEL)