Network Camera
5
Installation
1.
Screw the sun shield to the camera
body by using the mounting screws
provided with the camera.
2.
Screw the camera body to the
bracket by using the mounting
screws provided with the camera.
3.
Connect the external device and
network cable.
4.
Screw the bracket to the wall or
ceiling by using the mounting screws
provided with the camera.
WARNING: You might need to reinforce the wall or ceiling. If the wall or ceiling is not
strong enough to support the camera, the camera might fall damaging the camera
or causing injuries.
NOTE:
Locate the sun shield on the camera body’s backside as follows when screwing the sun
shield to the camera body to prevent scattered reflection:
< O >
< X >
