Revo Low Profile 35, Оригинальное руководство пользователя

Страница: 10 / 14

10
THE CARBON BRUSHES
The carbon brushes are a normal wearing part and must be replaced when they reach their wear limit.
Caution: Always replace the brushes as a pair.
To replace:
1. Remove the 4 screws and remove the motor tail cover.
2. Using pliers rotate the brush spring out of the way and slide the old carbon brush out of the brush
holder.
3. Unscrew the screw to remove the brush lead. The old carbon brush may now be lifted away.
4. Install a new brush. Installation is the reverse of removal.
5. Replace the motor tail cover.
CARBON BRUSHES
Due to the brush design, if the machine comes to a stop without any reason, the brushes have to be
checked. The brush design stops the machine before the carbon brushes are finished and protects the
motor.