Revo C 2PH Series, Руководство пользователя

Страница: 68 / 73

68
REVO C
2PH from 60A to 210A
User’s manual
Supply the electronic board
The REVO C thyristor unit, to work, requires a voltage supply for the electronic boards. The Max consumption
is 10VA.The voltage supply for the electronic boards is configured in line with customer requirements that are
defined in the Order Code. The Order Code is written on the identification label..
Warning:
Before connecting or disconnecting the unit check that power and control cables
are isolated from voltage sources.
Terminal M2-M4 Description
L1 Aux – Voltage Supply for electronic boards and syncronization
(See order code for the Value)
- Not Connected
L2/N Aux – Voltage Supply for electronic boards and syncronization
(See order code for the Value)
To change auxiliary supply voltage sold the correct link-jumper on REVO C board.
The type of mounted transformer depends of the chosen Voltage in the order code.
Order Code
As ordered Change to
Jumper JP1 + JP2 are linked Link only Jumper JP3
Transformer range Line voltage Transformer range Line voltage
RC2_ _ _-_1 90:135V 100/120V 180:265V 200/208/220/230/240V
RC2_ _ _-_2 180:265V 200/208/220/230/240V 342:528V 380/400/415/440/480V
RC2_ _ _-_3 238:330V 277V 540:759V 600/690V
Only Jumper 3 is linked Link Jumper JP1 + JP2
RC2_ _ _-_5 342:528V 380/400/415/440/480V 180:265V 200/208/220/230/240V
RC2_ _ _-_6 540:759V 600V 238:330V 277V
RC2_ _ _-_7 540:759V 690V 238:330V 277V
If the Auxiliary Voltage (written on the identification label) is different from Supply Voltage (to the load), use an
external transformer with primary equal to load voltage and secondary equal to the Auxiliary Voltage.
Attention! never link all the jumpers JP1+JP2+JP3 at the same time or jp3 + any other jumper, JP3 must be
always alone, follow only the configuration shown.
16
JP2
JP3 JP1