Pairing via Bluetooth
(AC-SSB200 only)
To connect your smartphone to the
AC-SSB200 via Bluetooth, follow
these steps:
1. Press the shutter button for
approximately three seconds. The
blue LED in the button will blink to
indicate that it is in Bluetooth
pairing mode.
2. Open the settings on your phone
and turn Bluetooth on. Your phone
will enter discover mode. In a few
seconds, you will see Revo
AC-SSB200 appear in the device list.
3. Select Revo AC-SSB200 in the
device list. Your phone will indicate
when it is paired, and the LED in
the button will glow a steady blue to
indicate that the AC-SSB200 is
paired.
To disconnect your phone, press and
hold the shutter button for three
seconds. The LED will turn off, and
your phone will indicate that it is not
connected.
Connecting via Cable
(AC-SSW200 only)
1. Mount the phone into the clip (see
instructions for Inserting Your Phone.)
2. Connect the mini plug to the
headphone jack on your phone.
