PAIRING YOUR HEADSET
In order to use your RevJams Disco LED Bluetooth
Headphones with a Bluetooth-enabled device, you will
first need to pair the two.
1. Place the headset and the mobile phone where they
are easily viewable and no more than 3 ft. apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is
powered off
4. Press the Multi-Function
button for approximately 3-4
seconds to power on the
headphones, the headphones will
automatically enter Pairing Mode
(the red and blue LED indicator
light will flash alternately which
indicates that you are in Pairing
Mode) A voice prompt will
announce “Bluetooth Mode”
5. Activate your mobile phone's Bluetooth pairing
function.
6. Set the mobile phone to search for Bluetooth
devices within range and select “
Disco LED
” from
the list of devices shown. Once pairing is successful
the LED indicator will flash blue and a voice prompt
will announce “Connected”.
7. If you are prompted for a Passcode enter “0000”
and press “ok” to pair the headset with your mobile
phone. (Note: If the Bluetooth version of your phone
is 2.1, there is no need to enter the passcode when
pairing.)
8. Now you can use your Bluetooth headset to listen
to music and make and receive phone calls.
7
