4
Pairing to Bluetooth Devices
In order to use your RevJams DISCOTEK Bluetooth Speaker with a
Bluetooth-enabled device, you will first need to pair the two.
1. Place the speaker and the mobile phone where they are easily viewable and no
more than 3 ft. (1M) apart.
2. Ensure that the speaker is fully charged
3. Slide the Power “OFF/ON” switch to the “ON” position to power on the device.
4. Briefly Press the Power
button, the speaker lights will turn blue and a chime
will be heard indicating that you are in Pairing Mode
5. Activate your mobile phone's Bluetooth pairing function.
6. Set the mobile phone to search for Bluetooth devices within range and select
“BTS400” from the list of devices shown
Operating Instructions
Powering on:
Fully charge the RevJams DISCOTEK Bluetooth Speaker via a Micro USB
connection, slide the Power “OFF/ON” switch to the “ON” position, and then
press the “ ” button to Power On, Connect or Pair.
Bluetooth playback mode:
Once your device is powered on, the device enters Bluetooth Pairing mode by
default and starts scanning automatically.
1).
Keep your mobile phone within 3 ft (1M) from the device;
2).
Enable the Bluetooth function on your mobile phone and start searching for
Bluetooth device (refer to the operating instruction of your mobile phone for
details);
3).
In the list of the Bluetooth devices list select “
BTS400
” and click Connect;
4).
If your mobile phone requires you to enter the password, please enter “0000”
and confirm to pair the phone and the device;
