30
31
Using the Dual Mode Body Pads
b Clean and dry the area where you will place the
electrode pads.
Attach the ends of the electrode pad to the
electrode cord.
See ‘What’s in the box?’ on page 4 to help identify the
parts.
Press the connectors firmly together .
c Make sure Revitive is switched off. Plug the other
end of the electrode cord into the electrode pad port
on the side of Revitive.
Plugging in the electrode cord will automatically
turn the foot-pads off.
d Remove the plastic liner from the electrode pads. Put
the liner to one side as you will re-use it after the
session has ended.
e Press the electrode pads
on your chosen area, as
shown on page
30
or the Thigh Pads as shown on page
34, gently pressing the adhesive side against the skin.
✔
Inside of
Ankle/foot
✔
✔
Calf
Lower back
✔
✔
✔
Upper back
Elbow
✔
Electrode Body Pads are for single person use only. Do
not share Body Pads with others.
a Select the area you wish to apply electrical stimulation to.
Recommended Body Pad placements are shown below:
Thigh
EMS & TENS
✔
TENS only
Knee
TENS only
Back of
Shoulder
EMS & TENS
EMS & TENS
Outside of
Ankle/foot
If using TENS for pain relief, position the Body Pads on either side of the area causing you
pain.
TENS only
TENS only
EMS & TENS
✔
EMS & TENS
✔
5610_IFU02_17816222_PRINT.indd 30-31
5610_IFU02_17816222_PRINT.indd 30-31
21/01/2021 11:12
21/01/2021 11:12
