16
17
Battery power option
a Follow steps a-c in the mains power option. This will start charging
the (integrated) rechargeable battery.
b When Revitive is switched off but on charge, the
battery indicator icon will constantly scroll during
charging; when the battery is full, scrolling will stop.
The battery indicator on Revitive indicates the
battery’s charge level.
c Once fully charged, the full battery indicator will stay illuminated until the
power adaptor is unplugged from the device or the electrical socket.
A full charge will take approximately 3 hours.
A full charge enables approximately 3½ hours of use (the equivalent of one 30
minute session each day for one week).
When the device is running from the battery, an indicator will show the
remaining battery level.
If you turn the device off and the low battery level indicator blinks for
10 seconds, the battery requires recharging.
Please note you can use the device while it is charging but the battery
indicator will not show
Low Battery
Full Battery
Instructions for use
Step 2: Powering Revitive
Revitive can be powered from either the internal rechargeable battery or by connecting it
to an electrical socket.
Mains power option
a Locate the AC/DC power adaptor.
b Plug the small end of the power cord into the
adaptor socket on the side of the device.
c Plug the power adaptor into the nearest electrical socket. This will also start
charging the (integrated) rechargeable battery.
Once you have connected Revitive to the electrical socket, follow ‘Step 3:
Using the SoftTouch foot-pads’ or ‘Step 4: Using the Dual Mode Electrode Body
Pads’ to continue setting up Revitive.
5603_IFU02_17807098.indd 16-17
5603_IFU02_17807098.indd 16-17
12/01/2021 08:53
12/01/2021 08:53
