2
THIS GAS BARBEQUE IS CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CAN/CGA-1.6b-98 AND ANSI
Z21.586-1998 RESPECTIVELY FOR OUTDOOR GAS GRILLS AND SHOULD BE INSTALLED to conform with local codes. In absence
of local codes, install to the current CAN1-B149.2 Propane Installation Code in Canada or to the National Fuel Gas Code, ANSI Z223.1
in the United States.
If a rotisserie motor is used, it must be electrically grounded in accordance with local codes, or, in absence of local codes, with the
current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the National Electrical Code, ANSI/NFPA 70 in the United States.
Use only the pressure regulator and hose assembly provided with this barbecue. Replacement pressure regulators and hose
assemblies must be specified by the manufacturer.
The regulator supplied with this unit has a QCC1 type fitting. Cylinders to be used with this unit must be supplied with a Sherwood
#3349 QCC1 cylinder valve. A QCC1 cylinder has a positive seating connection, which will not allow gas flow until a positive seal has
been achieved. It is also equipped with an excess flow device. In order to attain full flow to the barbecue, the valves must be in the
off position when the cylinder valve is turned on.
PROPANE CYLINDER SPECIFICATIONS:
A dented or rusty cylinder may be hazardous and should be checked by your propane sup-
plier. Never use a cylinder with a damaged valve. Use only a propane supply cylinder constructed and marked in accordance with
the specifications for LP-gas cylinders of the Canadian Transport Commission (CTC) or the US Department of Transportation (DOT).
This appliance has been designed for use with a 20 lb. (9.1 kg) size propane cylinder only (not supplied).
The propane cylinder must be provided with a shut-off valve terminating in a propane cylinder valve type QCC1, and a safety relief
device having direct communication with the vapour space of the cylinder. The cylinder supply system must be arranged for vapour
withdrawl and the cylinder shall include a collar to protect the cylinder valve. The cylinder shall incorporate an OPD (overfill protec-
tion device).
•
Read the entire instruction manual before
operating the gas grill.
•
Maintain proper clearance to combustibles
(16” to rear of unit, 13” to sides).
•
Leak test the unit before initial use, see diagram,annually
and whenever any gas components are replaced.
•
Follow lighting instructions carefully when operating grill.
Burner controls must be off when turning supply cylinder
valve on.
•
Ensure sear bars are positioned properly .
•
Clean grease tray regularly to avoid build-up
which may lead to grease fires.
•
Do not locate unit under unprotected combustible
construction.
•
Do not leave grill unattended when operating.
•
Do not light burners with lid closed
•
Do not move grill when hot or operating.
•
Do not allow cold water (rain,sprinkler,hose,etc) to
come into contact with heated unit. A large
temperature differential can cause chipping in the porcelain.
• This outdoor cooking gas appliance is not intended to be
installed in or on recreational vehicles and/or boats.
• This barbecue must only be used outdoors in a well-
ventilated space and must not be used inside a building,
garage or any other enclosed area.
• Keep any electrical supply cord and fuel supply hose
away from any heated surfaces.
• Inspect the fuel supply hose before each use. If there is
evidence of excessive abrasion or wear or the hose is cut,
it must be replaced, prior to using the barbecue, with a
replacement hose assembly specified by the manufacturer.
• When the propane cylinder is not disconnected from the
appliance, the barbecue and cylinder must be stored outdoors
in a well ventilated space.
• Do not locate in windy settings. High winds adversely affect
the cooking performance of the gas grill.
• Empty grease pan before moving gril to avoid gease spilage.
• Adults and especially children should be alerted to the
hazards of high surface temperatures. Young children
should be supervised near the barbecue.
• Under no circumstances should this barbecue be modified.
• Gas must be turned off at the propane or natural gas valve
when the appliance is not in use.
• When the appliance is to be stored indoors, the connection
between the propane cylinder and the appliance must be
disconnected and the cylinder removed and stored
outdoors in a well ventilated space out of reach of
children. Disconnected cylinders must not be stored
in a building, garage or any other enclosed area.
• The top lid is to be closed during the appliance preheat
period.
• Level grill prior to use
C A U T I O N
