
18
Figure 26
L.
Installing the Monitor (optional)
1.
If the 15” Monitor is already installed, please proceed to Step L.
2.
Locate the 15” Monitor. Open the Monitor up and locate the screw holes. You will
need to mount the unit to the metal plate that is already attached to the ceiling
using the provided screws. You will need to feed the wires through the holes in the
ceiling before mounting the monitor to the metal plate. Figure 27 shows how the
monitor will look (viewing it from the bench and looking upward) after the monitor
has been installed.
3.
Again, there should be a Video Out extension mounted on the roof. Connect the (yellow)
Video Out connection from the extension to the Monitor. (see Figure 26)
4.
There will be a red and black wire harness coming from the Monitor that will need to be
connected to the connection that is already up on the roof.
5.
PLEASE NOTE: There is a black ground wire pre-installed on the roof leading from
the power supply. Once installed and if your monitor shows an unclear picture as a
result of interference (horizontal lines showing on the screen), you will need to
connect the other end of the ground wire to the wire coming from the back of the
DVD Player labeled “Steering Wheel GND”. If you have a clear picture on your
monitor, you will not need to connect the black ground wire. For a video on how to
connect the black ground wire, please visit the video “DYN-6996-01 and GDI-6996-
01 Monitor Interference Resolution
” at the website link below:
https://www.youtube.com/watch?v=SNR1QBFQh3s
Содержание R-6P-HL
Страница 16: ...13 Figure 14 Figure 15 ...
Страница 18: ...15 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 ...
Страница 20: ...17 Figure 23 Figure 24 Figure 25 ...