REVELL Performa B15a, Брошюра

Страница: 11 / 32

11
At left, the
F32 driver
complement:
6 1 ⁄
2
-inch
woofers
5
1
⁄
4
-inch
midrange
1-inch
tweeter
F 32
crossovers
woofer
midrange
tweeter
F
32 shown
in Maple
finish
Rear panel
with tweeter
level control,
low-frequency
compensation
control and
binding posts
PERFORM
a
™
F32
The F32 combines large
floor-standing loudspeaker per-
formance in an elegant slim cabinet
design with a small “footprint” for
maximum placement versatility
and high visual appeal. It features
four magnetically-shielded propri-
etary drivers that offer a host of
improvements in vital areas such as
dynamics, distortion, and dynamic
compression along with improved
low-frequency reproduction and
wider placement versatility.
The F32 features two high-
performance 6
1
⁄
2
-inch woofers that
provide the surface area of a much
larger single driver and produce
authoritative bass with tremendous
output capability. Exclusive Organic
Ceramic Compound cone material
assures piston-like diaphragm
operation, contributing to the very
low distortion and freedom from
coloration.
Sophisticated Dual
Neodymium magnetic motor sys-
tems optimize linearity over a wide
operating range, resulting in con-
sistent timbre and low distortion
over a wide dynamic range. These
remarkable drivers also feature 2-
inch high power-handling flat-wire
edge-wound voice coils for
unprecedented power handling
capability and low distortion.
Virtually identical to the
woofer except for size, the 5 1 ⁄
4
-inch
midrange driver is optimized for
the crucial midrange frequencies,
providing remarkably smooth tim-
bral response and wide dynamic
range with vanishingly low distor-
tion. The treble frequencies are
faithfully reproduced by a newly-
developed 1-inch pure titanium
dome tweeter that features true
pistonic behavior over its entire
operating range and incorporates
Ferrofluid ® cooling.
Nearly half the width of its
predecessor, the F32 cabinetry fea-
tures tapered sides that provide a
svelte appearance and improved
placement flexibility, aided by a
Contour setting for various in-
room acoustical conditions as well
as a Boundary setting that allows
for near-wall and in-wall installa-
tions.
Each F32 is carefully cali-
brated to match the production
reference standard to within a frac-
tion of a decibel and is superbly
finished in a choice of Natural
Cherry, Maple or Black Ash wood
veneer.