v-19 TorrenT STArfighTer
™
KIT 1867
85186700200
The single-seat V-19 Torrent starfighter first
proved its outstanding capability as a combat
fighter at the Battle of Geonosis where it
impressed on account of its considerable
manoeuvrability, high versatility and speed
in normal space. As a result of its successes
in battle, the V-19 was quickly produced
in larger quanities, so that it could be
added to the Republic Gunships army's
arsenal as soon as possible. Since it takes
months to train the pilots of the Republic
Gunships to fly the V-19, at the start of
the Clone Wars only a small number were
initially deployed. For escort missions the
prototype is subsequently given a single
hyperdrive so that its deployment spectrum
is no longer restricted to individual planets
and sun systems. Its maximum speed is
a remarkable 20.000 kilometers in the
planetary stratosphere.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* OPTIONAL PARTS
* PIECES EN OPTION
If you have any questions or comments, call our hotline at:
(800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85186700200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Á LIRE AVANT DE COMMENCER
• DÉGAGGEZ UN ESPACE POUR TRAVAILLER.
• ÉTUDIEZ LES ÉTAPES DE MONTAGE
AVANT DE COMMENCER.
• CHAQUE PIÉCE EN PLASTIQUE PORTE UN
NUMÉRO DE PIÉCE.
• CETTE MAQUETTE L´ASSEMBLAGE PAR SIMPLE
PRESSION, MAIS VOUS POUVEZ COLLER LES
PIECES SI VOUS LE PREFEREZ.
• D´ECOUPER POUR ENLEVER LE PLASTIQUE
SUPERFLU ET BIEN LIMER AVANT L´ASSEMBLAGE
DES PI´ECES
MISE EN GARDE:
POSITIONNEZ AVEC PRÉCAUTION TOUTES LES PIÉCES
DE CE MODÉLE RÉDUIT, CAR VOUS NE POUVEZLES
EMBOîTER QU’UNE SEULE FOIS.
READ BEFORE YOU BEGIN
• CLEAR A SPACE TO WORK ON.
• STUDY THE ASSEMBLY DRAWINGS
BEFORE YOU BEGIN.
• EACH PLASTIC PART IS IDENTIFIED BY
A PART NUMBER.
• THIS KIT MAY BE SNAPPED TOGETHER BUT
PARTS MAY BE CEMENTED IF YOU PREFER.
• TRIM TO REMOVE EXTRA PLASTIC AND FILE
SMOOTH BEFORE PART ASSEMBLY.
CAUTION:
POSITION ALL PARTS IN THIS KIT
CAREFULLY. PARTS WILL ONLY SNAP TOGETHER
ONCE.
* TRIM
* D´ECOUPER
© 2009 Lucasfilm Ltd. & TM. All rights reserved. Used under authorization.
