REVELL C540, Инструкция по эксплуатации

Страница: 3 / 7

3
C540 In-Ceiling Architectural Loudspeaker
Instruction Manual
ABOUT REVEL
®
IN-CEILING SPEAKERS
Since the first Revel ® speakers in 1996, Revel products have stood at
the forefront of loudspeaker design and performance. Revel in-ceiling
loudspeakers draw upon the same research, resources and unique
perspective that put all Revel loudspeakers in a class by themselves.
Revel in-ceiling loudspeakers provide unparalleled value and are known
for their standard-setting low sonic coloration and their freedom from
distortion over an extraordinarily wide dynamic range.
C540 IN-CEILING LOUDSPEAKER HIGHLIGHTS
• Long-throw woofer with cast frame and rubber surround provides
high output with low distortion.
• 1-inch (25mm) metal-dome tweeter with an integrated waveguide
provides optimized response both on and off axis.
• High-order crossover network with premium-quality components
delivers extraordinarily accurate timbre reproduction.
PRODUCT REGISTRATION
Please take a moment to register your product on our Web site at www.
revelspeakers.com. You’ll enable us to keep you posted on our latest
advancements and help us to understand our customers and build
products that meet their needs and expectations.
BOX CONTENTS
Your Revel in-ceiling loudspeaker box should contain the following
items:
1 x Revel C540 in-ceiling loudspeaker
1 x round grille
1 x square grille
1 x extra scrim cloth for round grille
1 x extra scrim cloth for square grille
1 x mounting template
1 x instruction manual
UNPACKING THE SPEAKER
Carefully unpack the speaker. If you suspect damage from transit, report
it immediately to your dealer and/or delivery service. Keep the shipping
carton and packing materials for future use.
INSTALLATION CONSIDERATIONS
Your new Revel loudspeakers have been engineered to provide
extremely accurate performance. However, any speaker’s ultimate
performance will be affected by the speaker’s placement in the listening
room and the acoustics of the room. Not all listening spaces can
accommodate the ideal conditions of these two factors. Therefore,
careful attention to the placement of your Revel in-ceiling loudspeakers
will have a significant impact on the general performance of the
loudspeakers.
LOUDSPEAKER PLACEMENT FOR DISTRIBUTED
SOUND
• Since distributed sound is general sound throughout an area, place
the loudspeakers as uniformly as possible for even sound coverage
throughout the area.
• To avoid “hot spots” where the sound is too loud, plan to use more
loudspeakers, with each set to play at a lower volume.
• For even coverage of all listeners in a room or area, space the
speakers no more than 6.5 feet (2m) apart for 8-foot (2.5m) ceilings,
or no more than 9.5 feet (2.9m) apart for 9 – 10 foot (2.7m – 3m)
ceilings. Each speaker should be at least 3 feet (1m) from the
nearest side wall.
• The C540’s small size allows it to blend unobtrusively with typical
recessed lighting fixtures.
INSTALLATION INSTRUCTIONS
CAUTION: Do not press on the tweeter mount. Doing so can
damage the mount. Such damage is not covered by the speaker’s
warranty.
Revel architectural speakers are the most easily installed in-ceiling
loudspeakers on the market. However, if you are unable to understand
and follow the instructions in this manual clearly and fully, or if you
are unsure of your ability to install these loudspeakers properly, please
contact your dealer or a qualified installer.
WARNING: HARMAN International assumes
no responsibility for improper installation of
hardware or for any personal injuries or product
damages resulting from improper installation or
a fallen loudspeaker.
DOCUMENTATION CONVENTIONS
This document contains general safety, installation and operation
instructions for the Revel
® C540 in-ceiling loudspeakers. It is
important to read this document before attempting to use this
product. Pay particular attention to:
WARNING: Calls attention to a procedure,
practice, condition or the like that, if not
correctly performed or adhered to, could result
in injury or death.
CAUTION: Calls attention to a procedure, practice,
condition or the like that, if not correctly performed or
adhered to, could result in damage to or destruction of part
of or the entire product.
Note: Calls attention to information that aids in the
installation or operation of the product.