SMOOTH, WAVES & MOVEMENT
The Multiform Brush combines two heated sides and
heated plate, ceramic heated shorter bristles and longer
cool plastic bristles for excellent gliding movement and
maximum control. The ionic jet is automatically activated
when the brush is switched on, helping to control frizz.
PROGLOSS™ SUPER SMOOTH OILS
Every product in the Revamp haircare range is infused with
PROGLOSS™ SUPER SMOOTH OILS
- enriched with
Argan,
Keratin and Coconut
for ultimate smoothness and shine.
INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection, apply a heat protection spray.
• Clip up your hair ready for styling.
• Plug the product into a 220-240V mains power supply.
• Press and hold the power button for 2 seconds to
switch on.
• The default temperature is 170ºC. Use the temperature
c and - buttons to select your desired
temperature. If you have fine, delicate or coloured hair,
use the lower heat settings. If you have thick or coarse
hair, use the higher heat settings. It is suggested to start
on the lowest setting on initial use and increase the
temperature until the desired result is achieved.
• The temperature indicator LCD display will flash until
the temperature selected has been reached. Once the
temperature has been reached the LCD display will
remain lit.
• To activate the temperature lock, press and hold either
the centre or ends of the temperature control button for
3 seconds. A key
symbol will appear in the display
to indicate the lock is on.
NOTE: The temperature lock
disables both the temperature and power buttons.
• To deactivate the temperature lock, press and hold the
centre of the temperature control button for 3 seconds
again. The key symbol will disappear and you will be
able to adjust the temperature again.
• Run the brush through your hair as you would a
traditional brush, starting from the roots and moving
towards the ends, first with the heated bristle plate (1)
facing towards you, and then with the bristles facing
outwards.
• Divide your hair into sections and working lock by lock.
• Hold each lock taut, gripping it with one hand near the
end
• Pass the heated bristle plate (1) all the way through the
lock of hair.
• Run the brush from the roots to the ends, first with the
heated bristle plate (1) facing towards you, and then
with the bristles facing outwards.
• To style the ends, turn the brush 180° inwards or
outwards (depending on the desired effect), making
sure they come into full contact with the heated sides
(2).
• After use, switch off the brush - first ensure that the
temperature lock is deactivated, then press and hold
the power button for 3 seconds until display goes off.
Unplug from the mains.
For safety, place the brush on
the heat-proof mat while cooling.
Allow to cool before
storing away.
• When curling the hair, take care not to place the brush
too close to face, ears, neck or skin.
Follow us on revamphair.com for the latest hair tips and
advice.
Please note:
• This is a high performance product, avoid frequent use
to prevent hair damage.
• Regular use of styling products may deteriorate the
coating.
• Do not scratch the surface of the product as this will
deteriorate the effectiveness of the coating.
• While heating, during use and cooling, place on a flat,
smooth, heat-resistant surface. Only hold unit at the
end of the handle.
• The product reaches a very high temperature during
operation, please style with caution when using. Make
sure to keep away from the scalp and skin to avoid burns.
AUTO SHUT-OFF
This appliance has an automatic shut off feature for added
safety. If the appliance is switched on for more than 60
minutes continuously, then it will automatically switch off.
If you wish to continue using the appliance after this time,
press the power button to switch on. Use the temperature
c and - buttons to select your desired temperature.
This feature should not be considered as a substitute for
‘OFF’. ALWAYS REMEMBER TO SWITCH THE APPLIANCE OFF
WHEN NOT IN USE.
FEATURES
1. Heated ceramic plate and hot ceramic
bristles (in blue)
2. Heated ceramic sides (in blue)
3. Outside black cool bristles
4. Plastic black cool longer bristles
5. Ionic jet
6. Temperature indicator LCD display
7. Temperature control button
8. Power button
9. Non-slip heat-proof silicone mat
Temperature
lock on
Temperature
lock off
3
5
6
7
8
1
2
4
9