REV Robotics UltraUSB Скачать руководство пользователя страница 6

Страница: 6 / 9

REV-31-1592-QS-1

Step 2

Insert the data cable into the hub. If you have trouble
inserting the connector, you can use a small flathead
screwdriver to push the connector in.

Step 3

If you are using a power cable, insert the power cable into
the hub.

Содержание UltraUSB

Страница 4: ... details on the powering options 2 1 CABLE TYPES AND INFORMATION Cable Type Uses JST PH 4 pin to USB A Cable Data Connecting to any USB A Device i e a laptop JST PH 4 pin to USB Micro B OTG Cable Data Connecting to a Micro USB Phone OTG JST PH 2 pin to 3 pin 0 1 PWM Dupont Connector Cable Power Powering the hub off the 5V rail on the Expansion Hub Control Hub ...

Страница 5: ...ower Powering the hub off a 5V external battery pack with USB A connectors 2 2 INSERTING CABLES In addition to the materials included in the kit you will also need a 5 5mm Nut Driver or equivalent sized tool Step 1 Using a 5 5mm Nut Driver or equivalent tool remove the cable cover ...

Страница 6: ...obotics LLC 6 Step 2 Insert the data cable into the hub If you have trouble inserting the connector you can use a small flathead screwdriver to push the connector in Step 3 If you are using a power cable insert the power cable into the hub ...

Страница 9: ...REV 31 1592 QS 1 Copyright 2019 REV Robotics LLC 9 APPENDIX A SETUP EXAMPLES APPENDIX A 1 OPERATING A UVC CAMERA ON YOUR ROBOT APPENDIX A 2 USING TWO GAMEPADS WITH YOUR DRIVER STATION ...