#25 Chain Tool
Copyright © 2018 REV Robotics, LLC
3
1
#25 CHAIN TOOL OVERVIEW
This custom-designed tool allows teams to easily break and re-assemble #25 chain. The mandrel is used to push out the
chain pin. If using master links, the pin can be completely removed, but the depth guide screw allows the option of
partially pressing out the pin and then re-assembling without master links.
Figure 1: #25 Chain Break Tool Diagram
1.1
KIT CONTENTS
The REV Robotics #25 Chain Break Tool comes with the following:
•
1 Chain tool block
•
2 set screw mandrels
•
1 depth guide screw
•
1 cup point set screw
•
1 3mm Allen Wrench
CAUTION
Before using the #25 Chain Tool for the first time, remove the thread pin screw and use WD-40 or compressed air to
remove any shavings left in the tool from the manufacturing process.
This will ensure the chain break works
smoothly and efficiently breaks your chain. Reinstall the thread pin screw. Once this is complete the chain break is
ready for use.
