Rev-A-Shelf CHDSL-996-SN-1, Инструкция по установке, Страница: 2 / 4

2
Mark and pre-drill a 13/64” hole in
desired location (See Figure 1) .
If installing a pull, please skip to
Step 3.
Install the knob using (1) #8-32 x
1” screw (See Figure 2) .
Install the pull using (2) #8-32 x 1”
screws (See Figure 4) .
STEP 1
KNOB INSTALLATION
PULL INSTALLATION
STEP 2
STEP 4
STEP 3
Using the provided chart, measure,
mark and pre-drill (2) 13/64” holes
(See Figure 3) .
Note: Before drilling, make sure
hole locations are level.
FIG. 1
FIG. 3
FIG. 4
FIG. 2
13/64”
13/64”
Customer Service: 800-626-1126 | rev-a-shelf.com
13
64
13
64
#2 #2 #2
Y
Y