Chapter 4 Connecting with Computer and
Projector
After fixing the whiteboard, find a connecting port on the backboard right bottom.
Plug the quadrate side of USB cable into the connecting port, and plug the flat side
into the available USB port of computer, as follows. External power source is not
required. And please connect the Projector into the VGA port of your PC video card.
Flat USB port for connecting the computer
Quadrate USB port for connecting whiteboard
If your product model is with “B” letter (refer to “About model” for detailed explanation
for product model),
you also can use wireless Bluetooth for PC connection, the
connecting steps are as follows:
Step 1. After fixing the whiteboard, insert the round terminal of the 5V transformer into
a round jack on the backboard right bottom, and insert the power plug of the 5V
transformer into a power socket.
Step 2. Plug the Bluetooth adapter into an available USB port of computer. And please
connect the Projector into the VGA port of your PC video card.
Open the projector after connection, and adjust it to make its projection within the
active area and centered. Then use the trapezoid rectification function of the projector
Note: If your product model is with “N” letter (refer to “About model” for detailed
explanation for product model), the round jack is on the right bottom of the backboard.
