Retsch PT 300, Руководство пользователя

Страница: 37 / 42

Return for Service and Maintenance
37
9 Return for Service and Maintenance
Fig. 28: Return form
The acceptance of devices and accessories of the Retsch GmbH for repair, maintenance or
calibration can only be effected, if the return form including the decontamination declaration
service has been correctly and fully completed.

Download the return form located in the download section "Miscellaneous" on the Retsch
GmbH homepage ( http://www.retsch.com/downloads/miscellaneous/ ).

When returning a device, attach the return form to the outside of the packaging.
In order to eliminate any health risk to the service technicians, Retsch GmbH reserves the right
to refuse the acceptance and to return the respective delivery at the expense of the sender.
10 Disposal
In the case of a disposal, the respective statutory requirements must be observed. In the
following, information on the disposal of electrical and electronic devices in the European
Community are given.
Within the European Community the disposal of electrically operated devices is regulated by
national provisions that are based on the EU Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE).
Accordingly, all devices supplied after August 13
th
2005 in the business-to-business area, to
which this product is classified, may no longer be disposed of with municipal or household
waste. To document this, the devices are provided with the disposal label.