Retsch PP 35, Руководство пользователя

Страница: 25 / 48

Operating the Device
25
Fig. 16: End of program

Once the “End of program“ message appears, the press is blocked for approx. 25 seconds
in order to give the cylinder time to return to the initial position.

Open the door, pull out the tool sliding tray and take the cover off.

Put on the pressing-out aid.
Fig. 17: Put on the pressing-out aid

Push the tool sliding tray into the press again.

Close the door.

Select [Sample output].
Fig. 18: Activate the sample output.

As long as the cylinder is not in its initial position, a red bar appears in the display. As soon
as the cylinder has been pulled back to the initial position, the red bar disappears.