Retsch GM 200, Руководство пользователя

Страница: 25 / 60

Operating the Device
25
Element Description Function
B
Control element with knob For operating the machine
C
Grinding jar Container for the sample material
D
Lid on the grinding jar Seals the grinding jar
F
Hood Closes the machine
G
Air vents For exhaust air from the motor and inside of
the machine
H
Housing fan Fan for waste heat
I
On/off switch Switches the machine on and off,
disconnects the machine from the mains
J
Mains connection Connection for the power cable
K
USB interface Data connection
L
Warning sign "Pull out the plug " Warns about the risk of an electric shock
M
Type plate Lists the voltage version, serial number and
model among other things
N “Manual” sticker
Draws attention to reading the manual
O
Interface for the Wi-Fi connection
(RPIO) Data connection for connecting Wi-Fi to the
Retschbox (optional accessory)
P
Rubber coupling for the
Retschbox For securing the Retschbox
6.3 Switching On / Off

Turn on the GM 200 with the mains switch ( I ) on the back side of the device.
When the device is switched off, it is completely disconnected from the mains.
6.4 Opening and Closing of the Device
6.4.1 Opening

Connect the device to the mains.

Switch the device on by means of the mains switch ( I ).

Press the button ( B3.1 ). The locking mechanism is released and the hood opens.
6.4.2 Closing
CAUTION
C10.0008
Risk of pinching and bruising
Device hood closing

The device hood can trap fingers when closing, thereby causing pinching
or bruising.

Never allow the device hood to close by itself.

Always hold the device hood firmly when closing it.

Press the hood ( F ) downwards. The locking mechanism ( A ) locks automatically.